RLG Tyres On-line Shopping:

Welcome

To RLG On-Line Tyre Shop

UNDER CONSTRUCTION

Simply know the size, Click on the relevant vehicle type, Chose a product and pay via the PayPal link with your credit or debit card

(If paying by cheque, PLEASE allow ten days for payment to clear)

Tractor Implement Industrial Road Trailer Turf + Ground Care
ATV 4x4 Tubes + Flaps Vintage Wheels

Helpfull Information

Know your tyre size

1. Tyre Size Designation
On all 4x4 tyres there will be an LT in front of the tyre size if the tyre is of a reinforced construction. LT means light truck (reinforced). If there is a 'P' or no lettering at all, then it will be a Passenger tyre type. We strongly recommend fitting the same type of tyre on all four corners of the vehicle, fitting different types of tyre on the same vehicle can cause issues with the vehicles handling characteristics. The ‘235’ is the nominal width of the tyres cross section in millimetres. The ‘85’ is the ‘aspect ratio’ - the ratio of the side wall height to the cross-section width. The ‘R’ stands for radial-ply construction. The ‘16’ stands for diameter (in inches) of the wheel that the tyre is designed to fit. Always ensure that the tyre fitted has the correct or higher load/speed rating as specified for the vehicle. It is not recommended to mix tyres with different load/speed ratings on the same axle.

2. Indicates exterior sidewall on asymmetric tyres for fitting purposes.

3. Load Pressure Information
(Not required in the UK).

4. Brand Name.

5. Tyre Construction Details
(Not required in the UK).

6. European ECE Type
Approval mark number.

7. Load Capacity Index
Shows the maximum weight the tyre can carry at the speed indicated by its speed rating.

8. Speed Category Symbol
A letter which indicates the speed at which the tyre can carry the load corresponding to the Load Capacity Index. Common speed ratings are ‘Q’,’S’, ‘T’, ‘H’, ‘V’, ‘W’ ‘Y’, and ‘Z’.

9. Country of Manufacturer.

10. Commercial Name & Identity.

11. Location of Tread Wear Indicators
(Markings not on all tyres) Tread wear indicators moulded into the base of the the tread are set at the minimum legal depth of 1.6mm.

Tyre Markings

PayPal

Visit the PayPal web site